Napier Sportz SUV Tent Strengths

  • Provides a 10x10 room off the back of your vehicle
  • Easy setup

Napier Sportz SUV Tent Weaknesses

  • If a rope tied around the back of your vehicle will leave any gaps along the sides or top, then you will want to seal these gaps with foam or cloth when you cinch the sock strap to the back of the vehicle.

Description

The 83000 SUV Tent is the third generation of the Napier SUV/MiniVan Tent. This generation includes a detachable screenroom on the side. The 83000 SUV Tent will fit any vehicle in size from a HHR or PT Cruiser thru a Hummer H2 or a full size van. It will also fit any pickup with a bed cap, as long as it has less than an 8-inch lift.

The SUV Tents are great for sleeping in the back of your SUV, while providing a changing room with additional room to spread out outside of the vehicle.

The Napier SUV Tent has a door inside the vehicle sock, a door on the driver side, and a door opposite the vehicle. The screen room mounts to the driver side of the SUV tent. The awning attaches opposite the vehicle. Both of these are optional if you do not want to set them up.

The sock wraps around the back of the vehicle, and cinches in place with a strap. It is designed to work with a lift-up back door. However, it will work with barn-door rear doors as well. We suggest placing a 2x4 across the top of the doors to eliminate any pressure points and to keep the doors open. A cutting groove for each door will keep the 2x4 in place.

You can detach the vehicle at any time, zip up the door inside the sock, and drive off. Just as you would with a normal tent.

Operation

  • An SUV tent assembles just like any other tent.
  • Once the tent is standing, back the vehicle up to the sock.
  • If the muffler is hot and near the back of the truck, give it a few minutes to cool off.
  • Wrap the sock around the back of the vehicle.
  • Cinch the retaining strap tight to secure the sock to the vehicle.
  • Attach the screen room
  • Attach the awning.