What is the UnderCover made from? UnderCover Tonneau is made from a very selected composite of ABS plastics and polymers. Unlike other plastics aftermarket accessories, the UnderCover is constructed to prevent warping from direct sunlight. At only 58lbs, the UnderCover is also the strongest Tonneau cover on the market. How does your product compare to Fiberglass? There are two very important points that make Undercover far superior to a Fiberglass cover. First, it is light weight, which makes UnderCover very easy to remove and install. With our no-drilling hardware putting on and taking off is a breeze. Second, all of our covers come with wall mount hardware. Once you do take our cover off you can easily store it by hanging the cover in your garage. This is a feature that no Fiber Glass product can offer. How easy is it to take the cover off? It takes approximately 1-2 minutes to take the cover off and store it with wall mount hardware (included) on your garage wall. It is a 2 step process, first release the 2 struts and clip on side clips attached to the inside of the cover. Then, remove the 2 rings located at the front of the cover. Then simply lift the cover off and hang on the wall. In many cases one person can remove the cover with very little effort. Does your product warp or have problems? All composite materials expand and contract as a result of temperature changes. Our cover have been designed to keep this to a bare minimum, almost unnoticeable. We have not had nor do we anticipate any problems. How does your product hold up to extreme climates? The Undercover product is sold in Canada, Mexico, Arizona, Florida, Michigan and many other markets where the weather can be both extremely cold and hot. Because of its Patented Design, the UnderCover is very capable of handling these temperatures without any warp or damage. UnderCover is one of the most widely distributed Tonneau Covers in the Wholesale industry. This would only be true if the quality and workmanship satisfied their customer base and returns related to extreme temperatures were not a factor. Will you be offering a "painted to match" product? No. All our covers are black, textured polymer. Can your product be painted? Yes, it can be painted but the fact that it is textured will have some effect on color. Solid colors will provide excellent results. Metallic colors may result in metallic color flakes settling in the textures and resulting in a slightly different color than that of your truck. Is there any special care or maintenance required? No, just dust with a soft rag, wash with a mild cleaner. Do not use any waxes, only cleaners that are safe for plastics . The finish on our product has been tested to simulate five (5) years in the Arizona Desert with a gloss loss of only 3% over that period with just monthly care. Can I add accessories (i.e. spoiler, bike rack, rail bars, etc.) to your product? Yes, however, any additions/modifications will void the warranty. If you do decide to add to your cover call the factory for advice as to where to drill and what size holes will be required for specific size fasteners. How does your product attach to my truck? With brackets that have been designed to be totally non-intrusive to the truck. No holes to drill.The entire installation is a breeze and the whole process takes about 15 minutes and requires only 1/2" & 3/8" sockets or open end wrenches to mount the brackets and lock strikers. The bracket alignment is simple and requires no measuring. What problems may I encounter in the installation? None, however, if you have an over-the-rail bedliner it will have to be trimmed wherever the mounting brackets go. If you decide to trim off the length of the sides you do not have to trim off the part that goes over the front bulkhead. What type of security does your product provide for my cargo? Our cover is "wrap over tailgate" design, which locks the tailgate whenever the cover is down and locked. Dual locks are stainless steel and require no adjustments or maintenance other than periodic lubrication. There are no cables or rods that require adjustments. This assures reliable functionality in even the most rigorous situations. Is your product waterproof? Not waterproof, but water-tite.To ensure cargo protection from outside elements, a double seal perimeter gasket is installed all around with the front part having a flap that extends between the front bulkhead and the truck cab. This flap provides additional protection when opening the cover when water is on it and also while you are traveling in inclement weather. What makes your product different? All tooling and molds are digitally designed and CNC cut to insure the best fit and finish of any product on the market today. Where do I go if a problem comes up with my Cover? First, call us. Give us as much info as possible so we can react faster to your request. Provide us with your name, phone number, address,and serial number of your cover and a brief description of situation. How is the cover boxed to protect it from shipping damage? All of our covers are specially package with extra duty corrugation. We also wrap all 4 sides with banding tape in order to hold the inter-packaging intact. You should inspect the outer carton for obvious shipping damage. If you believe the cover has arrived with internal damage, you should refuse the order when it is delivered. If you feel the outer carton is just slightly damaged, make note of this on the freight bill. You should then confirm that the part shipped is the part you ordered. Do not open the box until you have confirmed this . If you open the box and then discover that it is not the right product you ordered, you could be responsible for the freight cost back to the warehouse. Once you have confirmed this is the right product, you should open the box as soon as possible to confirm that there is no concealed damage. If there is, report it immediately to us. How is the cover packaged inside the box, to protect it from damage? Just as we do with the outer carton, we use the very best Styrofoam blocks to rest the cover on. Every corner is protected along with all sharp objects. We also use a high grade of bubble wrap to keep the box from rubbing the cover. All of your parts are wrapped together and located underneath the cover. The parts are carefully taped into place. How hard is it to get the props (struts) off of the side rails? There is a small C shaped retaining ring that holds the strut to its bracket. This ring is released by using a small head screw driver to just slightly lift it away from the prop. DO NOT COMPLETELY REMOVE IT. It is designed to just slide forward about ¼ inch. Then push the prop out away from the truck, remove the screw driver and allow the ring to pop back into place. You do not have to remove the prop from the cover, there is a clamp on the side of the cover that will hold the prop in place while you move the cover. Where is the Serial Number located? If you are standing at the back of your truck, lift the cover up and at left hand side you will see a silver plate with 5 digits. This is your serial number and will be required anytime you have part or warranty issues. What are the lock covers for? The lock covers are there to protect the locks from dirt and grime that could build up. Also, during winter months, the caps protect the locks from snow and ice and. Lock covers are easily replaced. If you ever have damage issues you should contact us for replacement parts. When installing the front brackets, how far forward should I go? This is a very important point for proper installation of your UnderCover. You should only go forward enough for the tongue part of the bracket to hang over the bed rail. NEVER place the bracket up against the truck cab. This can cause serious damage and is not covered by our warranty. Once you place the stainless steel ring on the bracket it should not be pinched against the truck cab. It is alright if it taps it, but not pressed against it. Be sure and consult your installation guide carefully for proper alignment. Which way should the props (struts) be facing once they are put on? The cylinder end should be up and attached to the cover. This allows for the fluids to work properly. Also, you will be able to attach the prop(strut) to the clip when ever you want to remove your cover.